objdump命令是用查看目标文件或者可执行的目标文件的构成的gcc工具。
选项
--archive-headers
-a
显示档案库的成员信息,类似ls -l将lib*.a的信息列出。
-b bfdname
--target=bfdname
指定目标码格式。这不是必须的,objdump能自动识别许多格式,比如:
objdump -b oasys -m vax -h fu.o
显示fu.o的头部摘要信息,明确指出该文件是Vax系统下用Oasys编译器生成的目标文件。objdump -i将给出这里可以指定的目标码格式列表。
-C
--demangle
将底层的符号名解码成用户级名字,除了去掉所开头的下划线之外,还使得C++函数名以可理解的方式显示出来。
--debugging
-g
显示调试信息。企图解析保存在文件中的调试信息并以C语言的语法显示出来。仅仅支持某些类型的调试信息。有些其他的格式被readelf -w支持。
-e
--debugging-tags
类似-g选项,但是生成的信息是和ctags工具相兼容的格式。
--disassemble
-d
从objfile中反汇编那些特定指令机器码的section。
-D
--disassemble-all
与 -d 类似,但反汇编所有section.
--prefix-addresses
反汇编的时候,显示每一行的完整地址。这是一种比较老的反汇编格式。
-EB
-EL
--endian={big|little}
指定目标文件的小端。这个项将影响反汇编出来的指令。在反汇编的文件没描述小端信息的时候用。例如S-records.
-f
--file-headers
显示objfile中每个文件的整体头部摘要信息。
-h
--section-headers
--headers
显示目标文件各个section的头部摘要信息。
-H
--help
简短的帮助信息。
-i
--info
显示对于 -b 或者 -m 选项可用的架构和目标格式列表。
-j name
--section=name
仅仅显示指定名称为name的section的信息
-l
--line-numbers
用文件名和行号标注相应的目标代码,仅仅和-d、-D或者-r一起使用使用-ld和使用-d的区别不是很大,在源码级调试的时候有用,要求编译时使用了-g之类的调试编译选项。
-m machine
--architecture=machine
指定反汇编目标文件时使用的架构,当待反汇编文件本身没描述架构信息的时候(比如S-records),这个选项很有用。可以用-i选项列出这里能够指定的架构.
--reloc
-r
显示文件的重定位入口。如果和-d或者-D一起使用,重定位部分以反汇编后的格式显示出来。
--dynamic-reloc
-R
显示文件的动态重定位入口,仅仅对于动态目标文件意义,比如某些共享库。
-s
--full-contents
显示指定section的完整内容。默认所有的非空section都会被显示。
-S
--source
尽可能反汇编出源代码,尤其当编译的时候指定了-g这种调试参数时,效果比较明显。隐含了-d参数。
--show-raw-insn
反汇编的时候,显示每条汇编指令对应的机器码,如不指定--prefix-addresses,这将是缺省选项。
--no-show-raw-insn
反汇编时,不显示汇编指令的机器码,如不指定--prefix-addresses,这将是缺省选项。
--start-address=address
从指定地址开始显示数据,该选项影响-d、-r和-s选项的输出。
--stop-address=address
显示数据直到指定地址为止,该项影响-d、-r和-s选项的输出。
-t
--syms
显示文件的符号表入口。类似于nm -s提供的信息
-T
--dynamic-syms
显示文件的动态符号表入口,仅仅对动态目标文件意义,比如某些共享库。它显示的信息类似于 nm -D|--dynamic 显示的信息。
-V
--version
版本信息
--all-headers
-x
显示所可用的头信息,包括符号表、重定位入口。-x 等价于-a -f -h -r -t 同时指定。
-z
--disassemble-zeroes
一般反汇编输出将省略大块的零,该选项使得这些零块也被反汇编。
@file 可以将选项集中到一个文件中,然后使用这个@file选项载入。
实例
首先,在给出后面大部分测试所基于的源代码以及编译指令。
源代码如下:
[root@localhost test]# nl mytest.cpp
void printTest() {
char a;
a = 'a';
}
void printTest2() {
int a = 2;
a+=2;
}
对以上源代码进行编译,如下:
[root@localhost test]# g++ -c -g mytest.cpp
这里,生成的文件是mytest.o,为了方便测试包含了调试的信息,对可执行文件的测试,显示的结果类似。
查看当前使用的objdump的版本号:
[root@localhost test]# objdump -V
GNU objdump 2.17.50.0.6-14.el5 20061020
Copyright 2005 free Software Foundation, Inc.
This program is free software; you may redistribute it under the terms of
the GNU General Public License. This program has absolutely no warranty.
查看档案库文件中的信息:
[root@localhost test]# objdump -a libmy2.a
In archive libmy2.a:
myfile.o: file format elf32-i386
rwxrwxrwx 0/0 2724 Nov 16 16:06 2009 myfile.o
mytest.o: file format elf32-i386
rw-r--r-- 0/0 727 Jul 13 15:32 2011 mytest.o
这里,libmy2.a是一个使用ar命令将多个*.o目标文件打包而生成的静态库。命令的输出类似ar -tv,相比较ar -tv输出如下:
[root@localhost test]# ar -tv libmy2.a
rwxrwxrwx 0/0 2724 Nov 16 16:06 2009 myfile.o
rw-r--r-- 0/0 727 Jul 13 15:32 2011 mytest.o
显示可用的架构和目标结构列表:
[root@localhost test]# objdump -i
BFD header file version 2.17.50.0.6-14.el5 20061020
elf32-i386
(header little endian, data little endian)
i386
a.out-i386-linux
......省略......
这里,显示的信息是相对于 -b 或者 -m 选项可用的架构和目标格式列表
显示mytest.o文件中的text段的内容:
[root@localhost test]# objdump --section=.text -s
mytest.o mytest.o: file format elf32-i386
Contents of section .text:
0000 5589e583 ec10c645 ff61c9c3 5589e583 U......E.a..U...
0010 ec10c745 fc020000 008345fc 02c9c3 ...E......E....
这里注意,不能单独使用-j或者--section,例如objdump --section=.text mytest.o是不会运行成功的。
反汇编mytest.o中的text段内容,并尽可能用源代码形式表示:
[root@localhost test]# objdump -j .text -S mytest.o
mytest.o: file format elf32-i386
Disassembly of section .text:
00000000 <_Z9printTestv>:
void printTest()
0: 55 push %ebp
1: 89 e5 mov %esp,%ebp
3: 83 ec 10 sub $0x10,%esp
{
char a;
a = 'a';
6: c6 45 ff 61 movb $0x61,0xffffffff(%ebp)
}
a: c9 leave
b: c3 ret000000c <_Z10printTest2v>:
void printTest2()
c: 55 push %ebp
d: 89 e5 mov %esp,%ebp
f: 83 ec 10 sub $0x10,%esp
{
int a = 2;
12: c7 45 fc 02 00 00 00 movl $0x2,0xfffffffc(%ebp)
a+=2;
19: 83 45 fc 02 addl $0x2,0xfffffffc(%ebp)
}
1d: c9 leave
1e: c3 ret
这里注意,不能单独使用-j或者--section,例如objdump -j .text mytest.o是不会运行成功的。另外-S命令对于包含调试信息的目标文件,显示的效果比较好,如果编译时没有指定g++的-g选项,那么目标文件就不包含调试信息,那么显示效果就差多了。
反汇编出mytest.o的源代码:
[root@localhost test]# objdump -S mytest.o
mytest.o: file format elf32-i386Disassembly of section .text:
00000000 <_Z9printTestv>:
void printTest()
0: 55 push %ebp
1: 89 e5 mov %esp,%ebp
3: 83 ec 10 sub $0x10,%esp
{
char a;
a = 'a';
6: c6 45 ff 61 movb $0x61,0xffffffff(%ebp)
}
a: c9 leave
b: c3 ret0000000c <_Z10printTest2v>:
void printTest2()
c: 55 push %ebp
d: 89 e5 mov %esp,%ebp
f: 83 ec 10 sub $0x10,%esp
{
int a = 2;
12: c7 45 fc 02 00 00 00 movl $0x2,0xfffffffc(%ebp)
a+=2;
19: 83 45 fc 02 addl $0x2,0xfffffffc(%ebp)
}
1d: c9 leave
1e: c3 ret
这里,尤其当编译的时候指定了-g这种调试参数时,反汇编的效果比较明显。隐含了-d参数。
显示文件的符号表入口:
[root@localhost test]# objdump -t mytest.o
mytest.o: file format elf32-i386SYMBOL TABLE:
00000000 l df *ABS* 00000000 mytest.cpp
00000000 l d .text 00000000 .text
00000000 l d .data 00000000 .data
00000000 l d .bss 00000000 .bss
00000000 l d .debug_abbrev 00000000 .debug_abbrev
00000000 l d .debug_info 00000000 .debug_info
00000000 l d .debug_line 00000000 .debug_line
00000000 l d .debug_frame 00000000 .debug_frame
00000000 l d .debug_loc 00000000 .debug_loc
00000000 l d .debug_pubnames 00000000 .debug_pubnames
00000000 l d .debug_aranges 00000000 .debug_aranges
00000000 l d .note.GNU-stack 00000000 .note.GNU-stack
00000000 l d .comment 00000000 .comment
00000000 g F .text 0000000c _Z9printTestv
00000000 *UND* 00000000 __gxx_personality_v0
0000000c g F .text 00000013 _Z10printTest2v
这里,输出的信息类似nm -s命令的输出,相比较之下,nm命令的输出如下:
[root@localhost test]# nm -s mytest.o
0000000c T _Z10printTest2v
00000000 T _Z9printTestv
U __gxx_personality_v0
显示文件的符号表入口,将底层符号解码并表示成用户级别:
[root@localhost test]# objdump -t -C mytest.o
mytest.o: file format elf32-i386
SYMBOL TABLE:
00000000 l df *ABS* 00000000 mytest.cpp
00000000 l d .text 00000000 .text
00000000 l d .data 00000000 .data
00000000 l d .bss 00000000 .bss
00000000 l d .debug_abbrev 00000000 .debug_abbrev
00000000 l d .debug_info 00000000 .debug_info
00000000 l d .debug_line 00000000 .debug_line
00000000 l d .debug_frame 00000000 .debug_frame
00000000 l d .debug_loc 00000000 .debug_loc
00000000 l d .debug_pubnames 00000000 .debug_pubnames
00000000 l d .debug_aranges 00000000 .debug_aranges
00000000 l d .note.GNU-stack 00000000 .note.GNU-stack
00000000 l d .comment 00000000 .comment
00000000 g F .text 0000000c printTest()
00000000 *UND* 00000000 __gxx_personality_v0
0000000c g F .text 00000013 printTest2()
这里,和没-C相比,printTest2函数可读性增加了。
反汇编目标文件的特定机器码段:
[root@localhost test]# objdump -d mytest.o
mytest.o: file format elf32-i386
Disassembly of section .text:00000000 <_Z9printTestv>:
0: 55 push %ebp
1: 89 e5 mov %esp,%ebp
3: 83 ec 10 sub $0x10,%esp
6: c6 45 ff 61 movb $0x61,0xffffffff(%ebp)
a: c9 leave
b: c3 ret0000000c <_Z10printTest2v>:
c: 55 push %ebp
d: 89 e5 mov %esp,%ebp
f: 83 ec 10 sub $0x10,%esp
12: c7 45 fc 02 00 00 00 movl $0x2,0xfffffffc(%ebp)
19: 83 45 fc 02 addl $0x2,0xfffffffc(%ebp)
1d: c9 leave
1e: c3 ret
这里,对text段的内容进行了反汇编。
反汇编特定段,并将汇编代码对应的文件名称和行号对应上:
[root@localhost test]# objdump -d -l mytest.o
mytest.o: file format elf32-i386
Disassembly of section .text:00000000 <_Z9printTestv>:
_Z9printTestv():
/root/test/04_libraryTest/mytest.cpp:1
0: 55 push %ebp
1: 89 e5 mov %esp,%ebp
3: 83 ec 10 sub $0x10,%esp
/root/test/04_libraryTest/mytest.cpp:4
6: c6 45 ff 61 movb $0x61,0xffffffff(%ebp)
/root/test/04_libraryTest/mytest.cpp:5
a: c9 leave
b: c3 ret0000000c <_Z10printTest2v>:
_Z10printTest2v():
/root/test/04_libraryTest/mytest.cpp:6
c: 55 push %ebp
d: 89 e5 mov %esp,%ebp
f: 83 ec 10 sub $0x10,%esp
/root/test/04_libraryTest/mytest.cpp:8
12: c7 45 fc 02 00 00 00 movl $0x2,0xfffffffc(%ebp)
/root/test/04_libraryTest/mytest.cpp:9
19: 83 45 fc 02 addl $0x2,0xfffffffc(%ebp)
/root/test/04_libraryTest/mytest.cpp:10
1d: c9 leave
1e: c3 ret
这里,项"-d"从objfile中反汇编那些特定指令机器码的section,而使用"-l"指定用文件名和行号标注相应的目标代码,仅仅和-d、-D或者-r一起使用,使用-ld和使用-d的区别不是很大,在源码级调试的时候有用,要求编译时使用了-g之类的调试编译选项。
显示目标文件各个段的头部摘要信息:
[root@localhost test]# objdump -h mytest.o
mytest.o: file format elf32-i386Sections:
Idx Name Size VMA LMA File off Algn
0 .text 0000001f 00000000 00000000 00000034 2**2
CONTENTS, ALLOC, LOAD, readonly, CODE
1 .data 00000000 00000000 00000000 00000054 2**2
CONTENTS, ALLOC, LOAD, DATA
2 .bss 00000000 00000000 00000000 00000054 2**2
ALLOC
3 .debug_abbrev 00000046 00000000 00000000 00000054 2**0
CONTENTS, READONLY, DEBUGGING
4 .debug_info 000000ed 00000000 00000000 0000009a 2**0
CONTENTS, RELOC, READONLY, DEBUGGING
5 .debug_line 0000003e 00000000 00000000 00000187 2**0
CONTENTS, RELOC, READONLY, DEBUGGING
6 .debug_frame 00000044 00000000 00000000 000001c8 2**2
CONTENTS, RELOC, READONLY, DEBUGGING
7 .debug_loc 00000058 00000000 00000000 0000020c 2**0
CONTENTS, READONLY, DEBUGGING
8 .debug_pubnames 0000002f 00000000 00000000 00000264 2**0
CONTENTS, RELOC, READONLY, DEBUGGING
9 .debug_aranges 00000020 00000000 00000000 00000293 2**0
CONTENTS, RELOC, READONLY, DEBUGGING
10 .comment 0000002e 00000000 00000000 000002b3 2**0
CONTENTS, READONLY
11 .note.GNU-stack 00000000 00000000 00000000 000002e1 2**0
CONTENTS, READONLY
这里,更多的内容参见man objdump中的这个选项。